METALLIC EPOXY AND FLAKE

Coating Solutions-Moisture-Mitigation

Moisture Mitigating 100% Solids Epoxy

Moisture Mitigating 100% Epoxy Primer. This primer is a low viscosity class 1 Moisture Vapor Barrier with a low permeance of less than .07 perms. System consists of Two parts epoxy-silane resin to One-part epoxy hardener. This Silane modification & crosslink density allows it to penetrate deeply into the concrete reducing vapor perm from 24 to less than 3lbs/1000 sq. ft in 24hrs. Recommend testing via ASTM 1869 calcium chloride method to determine moisture.

Tech Data Sheet

Packaging: 3 quart, 3 gallon, 15 gallon kit
Coverage Rate: Approximately 150 sqft per gallon

Coating Solutions-Water-Based-Epoxy

Water Based Epoxy

Coatings Solutions Water-Based Epoxy is a self-priming two component Type 1 liquid epoxy floor coating system. Three parts resin to One-part epoxy hardener. Available in tint bases, premixed colors, and clear

Typical Applications: base coats for retail, commercial, workshop, garage, and high traffic floors.

Tech Data Sheet

Packaging:  1 Gallon and 4 Gallon Kit
Coverage Rate: Approximately 200-250 sqft per gallon

dk 700

DK 700

DK 700 is a class 1 moisture barrier and vapor blocker for concrete floors. This moisture blocker can be applied between 3 to 5 mils making a gallon go over 300 square feet depending on concrete floors surface conditions. Used as a primer coat, DK 700 will help keep moisture and air from coming up from concrete floors, eliminating unwanted bubbles and pinholes when applying epoxy, polyurethane floor coatings.

Tech Data Sheet
Part A SDS, Part B SDS

Packaging:  1 Gallon Kit
Coverage Rate: 320 – 400 sq ft per gallon

ColorTec 600 WB

SureCrete’s ColorTec 600WB™ is a water-based colored concrete floor epoxy comes in 30 standard colors. With SureCrete’s industrial concrete flooring colors, On-Demand tinting system, our water based floor epoxy can be custom colored to just about any color needed.

Tech Data Sheet
Part A SDS, Part B SDS

Packaging:  1 and 5 Gallon Kit
Colors: click here for chart
Coverage Rate:
First Coat: 125 – 175 sq ft per gallon, Second Coat: 200 – 250 sq ft per gallon

Coating Solutions 100% SolidE poxy

100% Solids Self Leveling Epoxy

Coatings Solutions 100% Solids Self Leveling Epoxy is a 2 part kit that requires two parts epoxy resin to one part epoxy hardener. Typically used for metallic epoxy finishes, this product creates a high gloss thick build coating. Available in tint bases, premixed colors, and clear.

Typical Applications: metallic epoxy, solids color epoxy floors, and approved for retail, commercial, workshop, garage, and high traffic floors.

Tech Data Sheet

Packaging:  30 ounce, 3 quart, 3 gallon, 15 gallon kit
Coverage Rate: Approximately 50-55 sqft per gallon

dk500

DK 500

SureCrete’s Dura-Kote premium clear floor epoxy 100% solids is a high-quality clear thick build floor coating for a high gloss shine used as a top coat or part of a system to create a 3D metallic floor. Dura-Kote DK series is also available in a Standardized lower cost option as well as a thin viscosity formula to help the movement when adding metallic pearl additives.

Tech Data Sheet
Part A SDS, Part B SDS

Packaging:  3 or 15 Gallon Kit
Coverage Rate: Clear Coat: 100 – 150 sq ft per gal (10.7 – 16 mils), Thick Build: 40 – 70 sq ft per gal (23 – 40 mils)

ColorTec 500

SureCrete’s Dura-Kote ColorTec500™ premium color epoxy 100% for floors is available in three and fifteen-gallon kits. 30 Standard colors including black, white, blue, gray, green, red and with SureCrete’s On-Demand tint machine, color matching virtually any color needed.

Tech Data Sheet
Part A SDS, Part B SDS

Packaging:  3 and 15 Gallon Kit
Colors: click here for chart
Coverage Rate:
Approximately 100 – 150 sq ft per gal

Epoxy Flooring DK- Metallic

DK Metallic

Dura-Kote Metallic pearls are blended into 100% solids epoxy to create a three dimensional floor. Mix and match shimmering pigments for a one-of-a-kind look.

Packaging: 4 and 16 ounce jar

Color chart

Tech Data Sheet

DK Flakes

DK Flakes

Dura-Kote Flake is a durable, multi-hued, slip resistant flooring system when combined with colored epoxy. Limitless color designs can be created.

Packaging: 25 lb bags

Color Chart
Tech Data Sheet 

Coating Solutions-Water-Based-Urethane

Tru-Alpha Water Based Urethane

Tru-Alpha Water-Based Urethane is a two component system. This formula has excellent scratch and chemical resistance that is virtually not affected by solvent exposure. Easy to mix three parts urethane resin to one-part catalysts by volume. Available in gloss and matte.

Typical Applications: Sealer or top coat for retail, commercial, workshop, garage, high traffic floors. Can be used for interior and exterior surfaces.

Tech Data Sheet

Packaging:  1 Gallon and 4 Gallon Kit
Coverage Rate: Approximately 200-300 sqft per gallon

Coating Solutions TruAlpha Polyaspartic

Tru-Alpha Polyaspartic

Tru-Alpha Polyaspartic is a fast drying high-gloss two component floor coating system. Easy mix ratio, one-part resin to one-part catalysts by volume. Project can be completed the same day then full traffic in 24hrs.

Typical Applications: retail, commercial, workshop, garage, high traffic floors. Can be used for interior and exterior surfaces.

Also approved on wood floors and concrete countertops.

Tech Data Sheet

Packaging:  2 Gallon and 10 Gallon Kit
Coverage Rate: Approximately 150-200 sqft per gallon

POLYURETHANE SOLVENT BASED

DK 400 

51% solids (by volume), high gloss, acrylic aliphatic polyurethane for vertical or horizontal concrete surfaces in Orlando, Florida. This product is a two component catalyzed system and is a great choice for interior concrete overlays or flatwork.

Tech Data Sheet
Part A SDS, Part B SDS

Packaging:  1 or 5 Gallon Kit
Coverage Rate: Approximately 300 – 400 sqft per gallon

DK 400 WB

DK 400 WB 

57% solids (by weight), water-based acrylic polyurethane concrete sealer for vertical or horizontal concrete surfaces. This water-based product is a two-component system. A perfect choice for concrete projects that need low odor & low VOC attributes, making it the perfect “GREEN” interior and exterior concrete sealer! Available in a gloss or satin finish.

Tech Data Sheet
Gloss Part A SDS, Satin Part A SDS, Part B SDS

Packaging:  1 or 4 Gallon Kit
Coverage Rate: Approximately 300 – 400 sqft per gallon

DK 180

DK 180

DK 180 is a specially formulated 80% solids hybrid solvent based polyaspartic coating. Unlike many polyaspartics, it has a user-friendly pot life of approximately 20 minutes and the ability to create a moderate build (6 ½ mil) single coat top coat. Turnaround time for a floor may be as little as 6 – 8 hours. Epoxy flakes may be covered in a single pass. DK 180 provides a low VOC (less than 200 g/L), UV stable, penetrating, film forming, color enhancing, and high gloss, moderate build wear surface. The rapid cure time eliminates excessive waiting to return a floor to service. It is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

Tech Data Sheet
Part A SDS, Part B SDS

Packaging:  1 or 4 Gallon Kit
Coverage Rate: Approximately 150 – 200 sqft per gallon

Sure Finish

SureFinish

SureFinish is an industrial floor wax product providing exceptional coating protection for both residential and commercial applications where a durable floor protection is needed with a slip-resistant finish. Available in both gloss and matte finishes, our floor wax product can be applied with a mop on conventional floors including terrazzo, quarry tile, brick, slate,  ceramic tile, Mexican tile, and stone surfaces is helpful to protect and make shine makes SureCrete commercial grade floor wax the smarter choice.

Tech Data Sheet
SDS

Packaging:  1 and 5 gallon
Coverage Rate: First Coat: 1500 sq ft per gallon, Subsequent Coats: 2000 – 3000 sq ft per gallon