PIGMENTED ACRYLIC SEALERS

Colortec Acrylic

Colortec Acrylic

SureCrete’s SureSeal ColorTec Acrylic™ is an exterior concrete paint that can be used for coloring driveway and sidewalk that require a high traffic coating.  Surecrete’s outdoor colored concrete surface sealer can also be color-matched to virtually any color in 1 and 5-gallon Low-VOC options.

Tech Data Sheet
SDS

Packaging:1 gallon pail, 5 gallon pail, 55 drum
Colors: click here for chart
Coverage Rate: Approximately 160 – 200 sqft per gallon

Colortec Acrylic WB

ColorTec AcrylicWB™ is a colored water-based outdoor concrete paint and sealer. Acrylic 30% solids, low VOC (less than 100 grams per Liter), strong binding, color, satin acrylic sealer for overlays or any cement based product. Our water base colored concrete sealer contains a hybrid, self-cross-linking, acrylic resin with built-in water repellents and tenacious penetration and adhesion. It contains no wax or silicone additives. Pigments are specifically formulated for UV stability, will not blush, and retain long gloss retention. Pigmented WB is non-flammable and environmentally safe.

Tech Data Sheet
SDS

Packaging:  1 gallon pail, 5 gallon pail, 55 drum
Colors: click here for chart
Coverage Rate: Approximately 160 – 200 sqft per gallon

PIGMENTED POLYURETHANES

Dura-Kote Pigmented Epoxy

ColorTec 400 WB

SureCrete’s Dura-Kote ColorTec 400WB™ commercial grade water-based colored floor polyurethane is manufactured to withstand the most punishing use such as forklifts and other industrial uses. This floor coating has a low VOC rating and can be used in just about any high traffic indoor concrete application.

Tech Data Sheet
Part A SDS, Part B SDS

Packaging:  1 or 4 Gallon Kit
Colors: click here for chart
Coverage Rate: Approximately 300 – 400 sqft per gallon

ColorTec-400

ColorTec 400

SureCrete’s ColorTec 400™ is a high gloss colored floor polyurethane is a high-quality, durable color concrete coating for concrete surfaces such as warehouses where high traffic protection is needed. Manufactured with high-quality raw materials and UV stable pigments, our solvent colored polyurethane is a builder and contractors preferred concrete coating.

Tech Data Sheet
Part A SDS, Part B SDS

Packaging:  1 or 5 Gallon Kit
Colors: click here for chart
Coverage Rate: Approximately 300 – 400 sqft per gallon

PIGMENTED POLYASPARATIC

Tru-Alpha Polyaspartic + Polyaspartic Color Pack

Tru-Alpha Polyaspartic + Polyaspartic Color Pack

Tru-Alpha Polyaspartic is a fast drying high-gloss two component floor coating system. Easy mix ratio, one-part resin to one-part catalysts by volume. Project can be completed the same day then full traffic in 24hrs. For pigmented applications: Using a volumetric container measure 64 oz. of Clear Part A then add 64 oz. of Part B catalysts. Add 16oz of Tru-Alpha Polyaspartic Color-pack. Mix for 2 minutes. Continually sweep the sides and bottom of the container. This will yield a 144 oz of pigmented coating.

Packaging:  Polyaspartic: 2 Gal Kit, Color Pack: 32 ounce Jar

POLYASPARTIC PFC-180

ColorTec 180

SureCrete’s industrial grade concrete colored floor polyaspartic coating products are contractors choice for fast drying high traffic interior high gloss durable flooring.

Tech Data Sheet
Part A SDS, Part B SDS

Packaging:  1 Gallon Kit
Colors: click here for chart
Coverage Rate: Approximately 150 – 200 sqft per gallon

PIGMENTED EPOXIES

Coating Solutions-Water-Based-Epoxy

Water Based Epoxy

Coatings Solutions Water-Based Epoxy is a self-priming two component Type 1 liquid epoxy floor coating system. Three parts resin to One-part epoxy hardener. Available in tint bases, premixed colors, and clear

Typical Applications: base coats for retail, commercial, workshop, garage, and high traffic floors.

Tech Data Sheet

Packaging:  1 Gallon and 4 Gallon Kit
Coverage Rate: Approximately 200-250 sqft per gallon

Coating Solutions-Moisture-Mitigation

Moisture Mitigating 100% Solids Epoxy

Moisture Mitigating 100% Epoxy Primer. This primer is a low viscosity class 1 Moisture Vapor Barrier with a low permeance of less than .07 perms. System consists of Two parts epoxy-silane resin to One-part epoxy hardener. This Silane modification & crosslink density allows it to penetrate deeply into the concrete reducing vapor perm from 24 to less than 3lbs/1000 sq. ft in 24hrs. Recommend testing via ASTM 1869 calcium chloride method to determine moisture.

Tech Data Sheet

Packaging: 3 quart, 3 gallon, 15 gallon kit
Coverage Rate: Approximately 150 sqft per gallon

Coating Solutions 100% SolidE poxy

100% Solids Self Leveling Epoxy

Coatings Solutions 100% Solids Self Leveling Epoxy is a 2 part kit that requires two parts epoxy resin to one part epoxy hardener. Typically used for metallic epoxy finishes, this product creates a high gloss thick build coating. Available in tint bases, premixed colors, and clear.

Typical Applications: metallic epoxy, solids color epoxy floors, and approved for retail, commercial, workshop, garage, and high traffic floors.

Tech Data Sheet

Packaging:  30 ounce, 3 quart, 3 gallon, 15 gallon kit
Coverage Rate: Approximately 50-55 sqft per gallon

ColorTec 600 WB

SureCrete’s ColorTec 600WB™ is a water-based colored concrete floor epoxy comes in 30 standard colors. With SureCrete’s industrial concrete flooring colors, On-Demand tinting system, our water based floor epoxy can be custom colored to just about any color needed.

Tech Data Sheet
Part A SDS, Part B SDS

Packaging:  1 and 5 Gallon Kit
Colors: click here for chart
Coverage Rate:
First Coat: 125 – 175 sq ft per gallon, Second Coat: 200 – 250 sq ft per gallon

ColorTec 500

SureCrete’s Dura-Kote ColorTec500™ premium color epoxy 100% for floors is available in three and fifteen-gallon kits. 30 Standard colors including black, white, blue, gray, green, red and with SureCrete’s On-Demand tint machine, color matching virtually any color needed.

Tech Data Sheet
Part A SDS, Part B SDS

Packaging:  3 and 15 Gallon Kit
Colors: click here for chart
Coverage Rate:
Approximately 100 – 150 sq ft per gal

PIGMENTED PENETRATING SEALER

TK 57865

TK-5765 SILOXANE DYE

A specially formulated pigmented waterproofing treatment for producing uniformly colored concrete surfaces that are water and chemically resistant. Available in standard or custom color options.
Features:
• Disguises and blends discolored or unevenly colored surfaces to produce a uniform and attractive finish.
• Protects the surface against damaging effects of water intrusion, acid rain, deicing chemicals, freeze/thaw exposure, airborne dirt, smog, industrial fumes, and most other atmospheric chemicals.

Tech Data Sheet
SDS

Packaging:  1 and 5 Gallon Kit
Coverage Rate:
Approximately 100 – 150 sq ft per gal

SEALER ACCESORIES

Sure Finish

SureFinish

SureFinish is an industrial floor wax product providing exceptional coating protection for both residential and commercial applications where a durable floor protection is needed with a slip-resistant finish. Available in both gloss and matte finishes, our floor wax product can be applied with a mop on conventional floors including terrazzo, quarry tile, brick, slate,  ceramic tile, Mexican tile, and stone surfaces is helpful to protect and make shine makes SureCrete commercial grade floor wax the smarter choice.

Tech Data Sheet
SDS

Packaging:  1 and 5 gallon
Coverage Rate: First Coat: 1500 sq ft per gallon, Subsequent Coats: 2000 – 3000 sq ft per gallon

Suregrip

SureGrip

SureCrete’s interior and exterior floor sealer non-slip grip additive, SureGrip is a product that can be added to a sealer or coating as well as broadcasted over the applied surface.

Tech Data Sheet
SDS

Packaging:  1 quart and 5 gallons
Coverage Rate: Varies upon product application