$187.95
TK Product’s Bright Kure & Seal is a 100% Acrylic concrete cure and seal that is 26% solids. Formulated in a gloss or matte finish.
Product Data Sheet [English] | download
Product Data Sheet [Spanish] | download
Safety Data Sheet [Gloss] | download
Safety Data Sheet [Matte] | download
LEED Data | download
Bright Kure & Seal was formulated to protect architectural concrete such as exposed aggregate, colored, and stamped concrete. A 26% solids, non-yellowing, cure and a seal made from pure 100% acrylic. It has been tested and approved by the Minnesota (DOT) Department of Transportation for the curing of decorative concrete surfaces. Available in a gloss and matte finish.
Bright Kure & Seal suitable for interior or exterior use on new and existing surfaces. Ideal for exposed aggregate and colored concrete surfaces, paving block, patio stone, driveways, and garage floors:
Curing, Exposed Aggregate:
300-500 square feet per gallon
Second Coat, Cured Concrete/Burnished Block:
300-500 square feet per gallon
Composition and Materials | A blend of 100% methyl/methacrylate acrylic polymers in a fast drying aromatic solvent.
Percent Solid | 26%
Flash Point | 105°F
Drying Time | Tack free: 1 hour / Open to Traffic: 2 hours
VOC Content | < 700 g/l
A.I.M. Category | Curing and Sealing Compound
Maximum VOC | 700 g/l
Applicable Standards:
– ASTM C-1315, Type 1, Class A, B & C
– ASTM C-309, Type 1, Class A & B and Type 1D with a red dye added.
– Fed. TTC-C-800A, Type 1, Class 1
– AASHTO Des. M-148, Type 1, Clear – DE CRD – C-300
– USDA Authorization for use in meat, poultry, and food processing plants.
– Resilient Tile Institute approval for compatibility with most resilient tile, carpet adhesives, and paints.
The artistry of a stunning concrete floor captivates our attention, but its strength and endurance hinge on a meticulous process that often goes unnoticed. This vital process, known as surface preparation, is paramount in the floor's creation. As defined by the...
There are so many fantastic brands of solvent acrylic sealer to choose from. Whether you are looking to create a pristine clear coat or change the color with pigment. The team at Select Surface Solutions have (3) three pro-tips that will help you choose the right...
Summer temps in June will average around 91 degrees. Shop temperatures will be warm, our AC’s will be working hard to lower the humidity. Both situations can make casting concrete challenging. To give yourself more working time with Xtreme Mixes, you should keep your...
Looks like you haven't made a choice yet.
