$189.95
Perdure A03 is a water-based acrylic sealer formulated to create a clear, non-yellowing, protective coating over concrete surfaces. A03 is UV and abrasion-resistant while protecting the concrete surface from moisture. A great choice for interior or exterior applications.
TDS | click here
Surface Prep |click here
Maintenance Guidelines | click here
Perdure A03 is a water-based acrylic sealer formulated to create a clear, non-yellowing, protective coating over concrete surfaces. It provides a tough, UV, and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust, wear, and provides a surface that is easy to clean and maintain. Perdure A03 is an excellent choice for both interior and exterior applications.
The excellent water, alkali, and efflorescence resistance of this product, in combination with its exterior durability and its ability to adhere to a variety of substrates, allow it to be used in many applications. Perdure A03 can be used to seal concrete, masonry, pavers, brick, saltillo tiles, or any cementitious substrate.
Perdure A03 yields 250 – 350ft2 per gallon depending on surface porosity and/or application method.
Perdure A03 can be easily applied with a short nap roller or a lamb’s wool applicator. The coverage will vary due to ambient temperature, surface temperature, surface porosity, and/or application methods. Do not apply if the surface temperature is below 50°F. Avoid pooling and applications to areas that are subject to ponding water. A single coat will seal the substrate to minimize staining while producing a “patina-like finish. Subsequent coats
will create a surface film with a higher sheen. Care should be taken to minimize the entrapment of air caused by over-rolling. Two coats are recommended for sealing applications. For complete installation instructions, contact your Duraamen’s technical representative.
Weight/gallon | 8.5 ± 2
Drying Time | 15-30 minutes
Re-Coat | 2 hour (approx.)
Flash Point | None (seta flash)
pH | 8.5-8.9
Solids Weight | 20.0%
Package Life | 1 year, unopened
VOC | 0.60 gm/liter
There are so many fantastic brands of solvent acrylic sealer to choose from. Whether you are looking to create a pristine clear coat or change the color with pigment. The team at Select Surface Solutions have (3) three pro-tips that will help you choose the right...
Summer temps in June will average around 91 degrees. Shop temperatures will be warm, our AC’s will be working hard to lower the humidity. Both situations can make casting concrete challenging. To give yourself more working time with Xtreme Mixes, you should keep your...
Looks like you haven't made a choice yet.
