Perdure U46

$194.95

A two-component water-based, non-yellowing (aliphatic), high-gloss polyurethane for use in various seamless floor and wall coating systems. Perdure U46 is free of the health and environmental problems normally found in solvent-based urethanes.

 

TDS | click here

Tech Bulletin 1 | click here

Tech Bulletin 3 | click here

Perdure U46 is a high-performance coating for various seamless floor and wall coating systems. Perdure U46 achieves a gloss finish and has good chemical, stain, and mar resistance. In addition, it’s easy to clean and has excellent color retention under heavy foot traffic. It is ideal for topcoats and finishes that require high abrasion resistance. Typical application areas are clean rooms, hospitals, pharmaceutical facilities, stained concrete, wood floors, and as a seal coat for most Duraamen’s floor and wall coating systems.

 

Perdure U46 Advantages

  • Low odor during application and cure
  • Fast dry and re-coat time
  • Low VOC
  • Excellent adhesion
  • Superior abrasion resistance

 

Performance Properties

Viscosity @ 75°F | 500-600cps
Mixing Ratio|  4-1
Solids Content | 43% by volume
VOC | 0.10lb/ga
Pot life | 60 minutes @ 75°F

Dry to Touch |  5–6 hours @ 75°F
Re-Coat | 8–10 hours @ 75°F
Light Traffic | 24 hours @ 75°F
Full Cure | 5–7 days @ 75°F

Tabor Abrasion (1000gm load,1000cycles, CS-17 Wheel) | 45mg loss

Impact strength (ASTM D 2794)
Direct | 160in.lbs
Reverse | 160in.lbs

Reviews & Ratings

Tips & Tricks

Stunning Floors Begin With The Right CSP

Stunning Floors Begin With The Right CSP

The artistry of a stunning concrete floor captivates our attention, but its strength and endurance hinge on a meticulous process that often goes unnoticed. This vital process, known as surface preparation, is paramount in the floor's creation. As defined by the...

Tips N Tricks For Applying Acrylic Sealer

Tips N Tricks For Applying Acrylic Sealer

There are so many fantastic brands of solvent acrylic sealer to choose from. Whether you are looking to create a pristine clear coat or change the color with pigment. The team at Select Surface Solutions have (3) three pro-tips that will help you choose the right...

Tips n Tricks for XS Mixes

Tips n Tricks for XS Mixes

Summer temps in June will average around 91 degrees. Shop temperatures will be warm, our AC’s will be working hard to lower the humidity. Both situations can make casting concrete challenging. To give yourself more working time with Xtreme Mixes, you should keep your...

My cart
Your cart is empty.

Looks like you haven't made a choice yet.