TK 290

$65.26$216.87

TK 290 is a low viscosity, solvent-based (600 g/L), multi-substrate, salt and water repellent. TK 290 is non-film forming, non-color enhancing, and meets the VOC regulatory compliance for AIM.

 

Product Data Sheet | download

Safety Data Sheet | download

TK-290 is a low viscosity, multi-substrate, salt, and water repellent. Available in standard VOC and a Low VOC option, TK-290 series is engineered to prevent damage from environmental conditions including de-icing agents, salts, freeze damage, efflorescence, scaling, and surface popping. TK-290 is a solvent-based formulation to penetrate up to 1/4 inch (6.35 mm) and chemically bond with the substrate to become a permanent part, prohibiting salt, water, chloride ion, and acid rain intrusion. This protection ensures the longest life-cycle to the substrate by preventing surface deterioration.

 

BENEFITS

  • Meets the VOC Regulatory Compliance for AIM
  • Non-Film Forming – Maintains the surfaces slip resistance (coefficient of friction)
  • Non-Color Enhancing – Will not alter the appearance of the substrate and will not yellow
  • Performance – Outperforms typical water repellents due to its superior penetration and bonding properties

 

TK 290 Uses

  • Concrete & Cementitious Surfaces
  • Pavers / Brick / Clay Brick
  • Travertine
  • Limestone
  • Slate Surfaces
  • All Light Commercial
  • Loading Docks and Ramps
  • Parking Structures
  • Marine Piers & Pilings
  • Multi-Family Housing
  • Theme & Water Parks
  • Healthcare & Educational
  • Government & Historical
  • Industrial & Business Parks
  • Warehousing Flooring

 

Application

Apply by roller or spray equipment in a uniform manner and in sufficient quantity to completely wet out the substrate with a minimum of 2-inch run down. The recommended coverage rate for most concrete substrates is 125 square feet per gallon. Very porous surfaces may require two coats.

 

Coverage

The recommended coverage rate for most concrete substrates is 125 square feet per gallon. Very porous surfaces may require two coats.

Bridge Decks/Ramps | 100-200 square feet per gallon
Smooth Concrete | 150-250 square feet per gallon
Exposed Aggregate | 100-200 square feet per gallon
Concrete Block | 40-100 square feet per gallon
Burnished Block | 150 square feet per gallon

Reviews & Ratings

Tips & Tricks

Stunning Floors Begin With The Right CSP

Stunning Floors Begin With The Right CSP

The artistry of a stunning concrete floor captivates our attention, but its strength and endurance hinge on a meticulous process that often goes unnoticed. This vital process, known as surface preparation, is paramount in the floor's creation. As defined by the...

Tips N Tricks For Applying Acrylic Sealer

Tips N Tricks For Applying Acrylic Sealer

There are so many fantastic brands of solvent acrylic sealer to choose from. Whether you are looking to create a pristine clear coat or change the color with pigment. The team at Select Surface Solutions have (3) three pro-tips that will help you choose the right...

Tips n Tricks for XS Mixes

Tips n Tricks for XS Mixes

Summer temps in June will average around 91 degrees. Shop temperatures will be warm, our AC’s will be working hard to lower the humidity. Both situations can make casting concrete challenging. To give yourself more working time with Xtreme Mixes, you should keep your...

My cart
Your cart is empty.

Looks like you haven't made a choice yet.