TK 9020

TK 9020 is a POLYUREA JOINT FILLER, fast-setting, two-component, polyurea/urethane blend used to fill control joints in concrete flooring.

Features

• Flexible enough to limit parallel crack occurrence, yet
  tensile enough to hold up to heavy traffic from wheels,
  forklifts and heavy traffic.
• Fast cure time (gels in less than 5 minutes and tack free
  in 30 minutes) allows the area to be reopened to traffic
  in minimal time.

USES

Suitable for interior use to fill control joints in concrete flooring in warehousing, industrial and manufacturing environments. May also be used to repair joints or cracks in any concrete slab.

TK 9020 LEED

Product Information Statement for LEED® New Construction (NC) Version 2.2 Credit Documentation TK-9020 POLYUREA JOINT FILLER is a fast set, two-component urethane/urea hybrid for filling control joints in concrete and may also be used as a crack filler. TK-9020 POLYUREA JOINT FILLER is flexible but tensile enough to hold up to fork lift and wheel traffic. The fast cure allows areas to be re-opened in minimal time.

TK Products certifies the following information for TK-9020 POLYUREA JOINT FILLER:

Manufacturing Location
TK-9020 POLYUREA JOINT FILLER is manufactured in Minnetonka, MN.
Regional Materials
20% by weight of TK-9020 POLYUREA JOINT FILLER was produced with regionally extracted and
processed materials.
Recycled Content
TK-9020 POLYUREA JOINT FILLER is manufactured with 6% combined recycled content.
VOC Content
TK Products certifies that the VOC (volatile organic content) of TK-9020 POLYUREA JOINT FILLER
is 14g/l.
Based upon the above information, TK Products certifies that TK-9020 POLYUREA JOINT FILLER
may contribute to the following LEED NC v2.2 Credits:
• MR Credits 1.1 & 1.2: Building Reuse: Maintain 75% & 95% of Existing Walls, Floors, & Roof
• MR Credits 4.1 & 4.2: Recycled Content: 10% & 20% (post-consumer + ½ pre-consumer)
• MR Credits 5.1 & 5.2: Regional Materials: 10% & 20% Extracted, Processed, & Manufactured