Uberdek

Uberdek is a polymer-modified concrete formulated to resurface existing concrete surfaces. It is a very cost-effective solution to expensive and time-consuming concrete replacement. It can be applied over horizontal and vertical concrete surfaces that are worn, spalled, and distressed. It is suitable for decorative trowel finishes or simply broom finishes on sidewalks, driveways, garage floors, patios, walkways, pool decks, and stairs. It is typically applied
with a steel finishing trowel or squeegee.

Uberdek Advantages

• Specialty polymers promote excellent bond to the existing concrete substrate
• Self curing, no additional curing methods needed
• Versatile – allowing for decorative trowel and broom finishes
• Freeze/Thaw stable
• Compatible with most sealers, dyes and stains
• Compatible with stencil applications
• Provides a slip-resistant surface

Technical Data

Application Temp | 50°F to 85°F
Working Time | 20 min. @ 70°F
Initial Set | 60 min. @ 70°F
Final Set | 120 min. @ 70°F
Mix Ratio | 6.0 to 6.5L of diluted CP1000 per 40lb bag of Uberdek

Compressive Strength (ASTM C 109)
1 Day | 2400psi
7 Days | 3600psi
28 days | 5000psi

Flexural Strength | 800psi

Shelf Life | 12 months when stored in cool and dry conditions.
Foot Traffic | 12 to 24 hours (depending on temp & relative humidity)
Wheel Traffic | 24 hours minimum

MIXING

1. Dilute CP1000. Mix 2 parts CP1000 and 1 Part Water.
2. The mixing ratio is 6.0–6.5 liters of diluted CP1000 with one 40lb bag of Uberdek. Using this ratio, Make each batch small enough for a 15-minute working window, as Uberdek must be applied within 15–20 minutes. Mix thoroughly for at least 4 to 5 minutes or until the mixture is lump-free.
3. When adding integral colorants add them to the CP1000
4. DO not mix more water or re-temper. This will reduce the strength as well as color of the cured product.
5. When rain is expected, do not apply before the material can be well cured or a sealer can be applied.