ColorTec 400 Pigmented Solvent-Based

ColorTec 400™ is a 2 component 51% solids, solvent acrylic aliphatic polyurethane designed as a non-yellowing thin mil color coating for interior concrete, cement based overlays, or as a top finish coat on epoxy systems. The high performance pigmented top coat generates the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance that is both user-friendly and extremely durable. ColorTec 400 is ideally suited for both commercial and residential settings:
aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

COLORS | 200 + Colors Available

MIXING RATIO | 4:1 (4 part A to 1 part B)

COVERAGE | Varies upon substrate: approximately 300 – 400 ft² per gal. (28 -37m² per 3.8 liter) 4 – 5.3 mils wet; 2 – 2.7 mils cured

COLORTEC 400 MIXING

1. Organize mixing station that neither has to relocate, nor block the progress of application. Staging is critical so that Part A and part B are not confused with one another or mixed too far in advance. Once A and B are mixed, the catalyzed product should be placed on the floor within 30 minutes. If left in the pail too long, product will cure at an accelerated rate rendering it useless.
2. Mechanically mix part A with “Jiffy” style mixer blade for 1 minutes at medium speed to insure pigment dispersal.
3. Pour 1 part B into 4 parts A. Note that kits are premeasured for convenience.
4. Mechanically mix (with jiffy style mixer) both parts A and B for 2 minutes at medium speed.
5. Transfer contents into an appropriately sized pan or pail equipped with a roller grid.
6. Do not leave pail upside down to drain onto floor. Any unmixed portion of A or B that may have accidentally been