$144.70 – $620.80
SCOFIELD® Revive™ Stain is a semi-opaque, pigmented, ready-to-use solvent-based penetrating polysiloxane stain designed to add new color to uncolored concrete, or to renew color intensity and uniformity to aged, weathered, or patched, concrete surfaces.
Product Data Sheet | download
Safety Data Sheet | download
Color Chart | download
SCOFIELD® Revive Stain is a semi-opaque, pigmented, ready-to-use solvent-based penetrating polysiloxane stain designed to add new color to uncolored concrete, or to renew color intensity and uniformity to aged, weathered, or patched, concrete surfaces. It is ideal for unifying the appearance of partial slab replacements, patches, job continuations, or slabs of different composition or mix design. When properly applied, SCOFIELD® Revive Stain will deeply penetrate properly prepared newly placed concrete, old concrete, concrete pavers, or unglazed ceramics. It will dry to a flat low-luster finish with excellent weather, water, slip, and ultraviolet light resistance, without significant film build or developing a paint-like appearance. SCOFIELD® Revive™ Exterior Concrete Stain must be topcoated with a quality Scofield sealer such as CEMENTONE® Clear Concrete Sealer, SCOFIELD® Cureseal-W™, SCOFIELD® Selectseal Plus™, or SCOFIELD® Repello® FPS.
REVIVE STAIN USAGE
ADVANTAGES
COVERAGE RATES
Do not thin. Coverage will depend upon method of application, surface porosity, and the texture of the substrate. Coverage on flat finished concrete is typically 100–300 ft2/gal (2.5-7.4 m2/L). Porous, broomed, or textured finishes will require more stain and coverages of 50 – 200 ft2/gal (1.2 – 4.9 m2/L) is typical.
The artistry of a stunning concrete floor captivates our attention, but its strength and endurance hinge on a meticulous process that often goes unnoticed. This vital process, known as surface preparation, is paramount in the floor's creation. As defined by the...
There are so many fantastic brands of solvent acrylic sealer to choose from. Whether you are looking to create a pristine clear coat or change the color with pigment. The team at Select Surface Solutions have (3) three pro-tips that will help you choose the right...
Summer temps in June will average around 91 degrees. Shop temperatures will be warm, our AC’s will be working hard to lower the humidity. Both situations can make casting concrete challenging. To give yourself more working time with Xtreme Mixes, you should keep your...
Looks like you haven't made a choice yet.
