Tru-Alpha Polyaspartic

Tru-Alpha Polyaspartic by Coating Solutions, is a fast drying high-gloss two component floor coating system. Easy mix ratio One part resin to One-part catalysts by volume. Project can be completed same day then full traffic in 24hrs. Available in a 80% solids and a 88% low odor.

Typical Applications | Retail & Commercial Floors, Garage & Showroom Floors, High-Traffic Areas, Wood & Concrete Countertops

Coverage | Primer = 150-200 sq. ft. / gal, as a Finish Coat = 150-800 sq. ft. / gal

Tru-Alpha Polyaspartic Application

Surface Prep & Priming

• Grind concrete floors to CSP-3, vacuum dust, wipe down with denatured alcohol. If moisture is present floor may require application of an Epoxy-Silane Moisture
  Mitigating Primer at spread rate of 150-180 sq. ft. per gallon. (See product label for further instruction.)

Mixing

• Add One Part B to One Part A by volume. Mix Tru-Alpha Polyaspartic for 2 minutes with mechanical mixing. Wearing spike shoes immediately pour mixed material on the floor.

Adding Pigment

• Using a volumetric container measure 64 oz. of Clear Part A then add 64 oz. of Part B catalysts. Add 16oz of Tru-Alpha Polyaspartic color-pack. Mix for 2 minutes.
  Continually sweep sides and bottom of container. This will yield a 144 oz. of pigmented coating.

Application

• Pour mixed material on the floor in 12” ribbons. While wearing spiked shoes back roll with 3/16” premium lint-free roller.