$142.75
XS PC12™ is a solvent-based, 59% solids, clear high gloss concrete casting sealer that is easy to apply. Manufactured with high-quality materials, PC-12 is a great choice for sealing your concrete cast pieces for a long durable surface.
Product Data Sheet | download
Safety Data Sheet [Part A] | download
Safety Data Sheet [Part B] | download
XS-PC12 is a specially formulated two component, 59% solids hybrid solvent based polyurea coating designed for application over completed concrete surfaces. XS PC12 provides a low VOC (400 g/L), penetrating, film forming, color enhancing, and high gloss wear surface. The high performance clear
top coat generates the premier balance of strength, flexibility, chemical and scratch resistance. XS-PC12 is ideally suited for both commercial and residential settings applied upon concrete countertops, fireplace surrounds, shower panels, floor tiles, wall panels, and all Xtreme Series materials.
Like some other sealers, XS PC12 becomes food safe upon curing. It is stain resistant to most household chemicals and culinary items, and is heat resistant to 300°F (149°C). XS-PC12 is distinctive in its ability to be touched up or repaired.
MIXING RATIO | 3:1 (3 part A to 1 parts B)
COVERAGE | Approximately 100 ft² per qt. (9.3 m² per 0.9 L) per coat 4 mils wet; 2.4 mils cured
Apply in ambient and surface temperatures ranging above 60°F (16°C) and below 90°F (32°C) and that will remain within ranges for at least 12 hours. Avoid application during wet, foggy weather.
Maximum Pot Life | 30 minutes
Ready for Recoat | Dry to the touch
Recoat “window” | After 12 hours sanding required
Light Duty Use | 24 hours
Full Use | 48 hours
Complete Cure | 7 days
The artistry of a stunning concrete floor captivates our attention, but its strength and endurance hinge on a meticulous process that often goes unnoticed. This vital process, known as surface preparation, is paramount in the floor's creation. As defined by the...
There are so many fantastic brands of solvent acrylic sealer to choose from. Whether you are looking to create a pristine clear coat or change the color with pigment. The team at Select Surface Solutions have (3) three pro-tips that will help you choose the right...
Summer temps in June will average around 91 degrees. Shop temperatures will be warm, our AC’s will be working hard to lower the humidity. Both situations can make casting concrete challenging. To give yourself more working time with Xtreme Mixes, you should keep your...
Looks like you haven't made a choice yet.
